Many locations may not have space for portable or wall-mounted dryers. At such locations, the only choice is a ductwork dehumidifier. It may have an effect on systems based on condensation or absorption. It does, however, have the capability of connecting to the duct. A ducted system has a number of advantages over a non-ducted system. For instance, it conserves floor area by installing suspended or outdoor ceilings. Additionally, due to its remote installation, it contributes no noise to the space.
For an indoor swimming pool, the ideal solution is a dehumidifier for ducting. It can be linked to the HVAC system's supply or return ductwork. As a result, it is capable of rapidly reducing humidity. It can also be linked to the fresh air intake duct in the same manner. As we are all aware, humidity is introduced into the home via the outside fresh air drawn in by the air conditioner. As a result, in order to control the humidity level inside the house, we must dry this fresh air. A duct mount dehumidifier can be used to dry the fresh air before it enters the air conditioning system.
It is a compact ducted dehumidifier that is ideal for tiny rooms. It is, for example, an excellent solution for a jacuzzi or a tiny storeroom. Any machine used in the living area must be completely silent. Additionally, it is worth noting that SPD-50L satisfies this requirement. Often, there is a space constraint above the fake ceiling. As a result, the SPD-50L is compact in size. Users can operate with ease while using a wall mount controller.
The SPD-50L ductwork dehumidifier is a cost-effective solution. Users can link this system in six distinct ways. As a result, it provides flexibility in overcoming obstacles on-site. If there is no possibility of connecting this unit to the AC ducting, it can be installed as an independent unit. The repair is quite simple. It requires a power source and a drainage point.
Several items must be addressed during the system's installation. The user is responsible for reading all directions in the manual. Safety instructions, in particular, must be properly followed. Bear the following point in mind when installing this dehumidifier for ducting.
Regular maintenance is necessary to ensure the equipment performs optimally. As a result, allow at least 60 cm clearance on the front side of the system.
Ascertain that the ceiling is constructed of a material capable of supporting the unit's weight at least twice over.
While working, the unit should not vibrate. Thus, at lifting lugs, employ a sturdy M10 expansion bolt with a rubber bush.
Ductwork at the inlet and outflow should be of the right size. Attempt to avoid a 90-degree bend in the duct.
The controller wire should not exceed nine metres in length to ensure proper operation. Additionally, eliminate crosstalk between the controller and power wires.
The system's distinguishing characteristics are its dependability and ease of usage. To be more specific, all components of the SPD-50L are of the highest quality. This unit is strong due to its steel housing. Additionally, it features an efficient rotary compressor that operates on R410a or R407c. As a result, it is an environmentally beneficial piece of equipment. Round collars are used on the air inlet and outflow. As a result, it is simple to connect, especially when using flexible ducts. The SPD-50L ductwork dehumidifier has a 500 CMH airflow capacity.
A replaceable filter of the G4 level is provided at the inlet. Additionally, it complies with the IPx4 standard for protection. The SPD-50L ducted dehumidifier operates in temperatures ranging from 5 to 38 °C. Additionally, this system must incorporate overheat prevention. As a result, it prevents compressor damage.
As previously stated, the purchaser will receive a wall-mount LCD controller with the unit. Users can modify and set the desired humidity level with this controller. Additionally, a programmable delay timer can be used to automatically turn on or off the system. As a result, it contributes to energy conservation. Additionally, the controller displays the room's humidity and temperature.
This ductwork dehumidifier features three fan speeds. Although, in auto mode, the unit will automatically adjust the fan speed. The controller includes an internal memory for storing settings. As a result, the user is not required to perform a set each time. Most notably, SPD-50L is capable of self-starting when power is restored.
|Air Volume||500 CMH|
|Running Temp||5 – 38°C|
|Dimension and Weight|
|Product weight||45 kg|
|Package weight||52 kg|
|Product size:||920 x 440 x 375 mm|
|Package size||1020 × 515 × 540 mm|
* At 30°C, 80% RH | **Max power 1050 Watt | Specification and data may subject to change without prior notice.